


























SOL Kids Organiser Combo
from A$218.00
SOL KIDS ORGANISER COMBO
Our wooden bookshelf with peg board organiser in one listing. Two products purchased as one package. The SOL kids organiser is a perfect piece to store and display your favourite kids books and toys, as well as hand up jackets and bags.
Made from solid Australian Pine or Tasmanian Oak, each piece is finished to the highest standard. We round over the edges to give a smooth feel, and apply a kid safe, water and heat resistant, durable oil in satin-matte finish (not too glossy and not too matte).
To hang the SOL KIDS ORGANISERS we have drilled two keyhole mounting points into the back of the products. These create an attractive floating piece that is also safe and secure to hang up to 20kgs of weight*
If you would prefer to simply stick the shelf to your wall, we can apply a 3M adhesive strip to the product that will easily hold up to 10kgs of weight. Just let us know in the comments :)
If you would like the two products in different lengths, each individual product can be seen in our other listings under the STEIVE and the SOLOMON.
### ALL HANGING INSTRUCTIONS ARE PROVIDED INCLUDING PLASTERBOARD, TIMBER OR BRICK / CONCRETE SCREWS AND PLUGS. ####
LENGHTS:
150cm | 140cm | 130cm | 120cm | 110cm 100cm | 90cm |80cm | 70cm | 60cm | 50cm | 40cm | 30cm
OVERALL SIZES:
16.5cm High x 6.5cm Deep
TIMBER OPTIONS:
Oak | Raw Oak | Walnut Stained Oak | Pine | Raw Pine | White Pine
NOTE:
Please be aware that the wood may vary in grain, tone and may show natural timber features such as gum veins. All materials are finished to the highest standard. Does not include accessories in images.
* IMPORTANT - PLEASE NOTE:
Weight capacity of up to 20kg depending on wall type, the wall fixings used, bracket (s) correctly installed, and actual shelf weight. Brick walls and solid timber stud attachments will carry the required weight. If you hang the shelf on plasterboard (hollow walls) using just the plasterboard fixings we provide, at least one screw should fasten into a stud. Weight capacity will be less up to 15kgs. If no studs are available, there will be a maximum of 10kgs load, including the shelf, if using just plasterboard fixings.
D E L I V E R Y:
Our products are made to order.
* Longer production times may occur in peak buying periods.
ALL ORDERS WILL REQUIRE SIGNATURE UPON DELIVERY UNLESS OTHERWISE STATED.
This product is 100% Australian hand made by Adam and Anita from Welds & Wood.
Our wooden bookshelf with peg board organiser in one listing. Two products purchased as one package. The SOL kids organiser is a perfect piece to store and display your favourite kids books and toys, as well as hand up jackets and bags.
Made from solid Australian Pine or Tasmanian Oak, each piece is finished to the highest standard. We round over the edges to give a smooth feel, and apply a kid safe, water and heat resistant, durable oil in satin-matte finish (not too glossy and not too matte).
To hang the SOL KIDS ORGANISERS we have drilled two keyhole mounting points into the back of the products. These create an attractive floating piece that is also safe and secure to hang up to 20kgs of weight*
If you would prefer to simply stick the shelf to your wall, we can apply a 3M adhesive strip to the product that will easily hold up to 10kgs of weight. Just let us know in the comments :)
If you would like the two products in different lengths, each individual product can be seen in our other listings under the STEIVE and the SOLOMON.
### ALL HANGING INSTRUCTIONS ARE PROVIDED INCLUDING PLASTERBOARD, TIMBER OR BRICK / CONCRETE SCREWS AND PLUGS. ####
LENGHTS:
150cm | 140cm | 130cm | 120cm | 110cm 100cm | 90cm |80cm | 70cm | 60cm | 50cm | 40cm | 30cm
OVERALL SIZES:
16.5cm High x 6.5cm Deep
TIMBER OPTIONS:
Oak | Raw Oak | Walnut Stained Oak | Pine | Raw Pine | White Pine
NOTE:
Please be aware that the wood may vary in grain, tone and may show natural timber features such as gum veins. All materials are finished to the highest standard. Does not include accessories in images.
* IMPORTANT - PLEASE NOTE:
Weight capacity of up to 20kg depending on wall type, the wall fixings used, bracket (s) correctly installed, and actual shelf weight. Brick walls and solid timber stud attachments will carry the required weight. If you hang the shelf on plasterboard (hollow walls) using just the plasterboard fixings we provide, at least one screw should fasten into a stud. Weight capacity will be less up to 15kgs. If no studs are available, there will be a maximum of 10kgs load, including the shelf, if using just plasterboard fixings.
D E L I V E R Y:
Our products are made to order.
* Longer production times may occur in peak buying periods.
ALL ORDERS WILL REQUIRE SIGNATURE UPON DELIVERY UNLESS OTHERWISE STATED.
This product is 100% Australian hand made by Adam and Anita from Welds & Wood.
Wood Type:
Length:
Quantity:
Add To Cart
SOL KIDS ORGANISER COMBO
Our wooden bookshelf with peg board organiser in one listing. Two products purchased as one package. The SOL kids organiser is a perfect piece to store and display your favourite kids books and toys, as well as hand up jackets and bags.
Made from solid Australian Pine or Tasmanian Oak, each piece is finished to the highest standard. We round over the edges to give a smooth feel, and apply a kid safe, water and heat resistant, durable oil in satin-matte finish (not too glossy and not too matte).
To hang the SOL KIDS ORGANISERS we have drilled two keyhole mounting points into the back of the products. These create an attractive floating piece that is also safe and secure to hang up to 20kgs of weight*
If you would prefer to simply stick the shelf to your wall, we can apply a 3M adhesive strip to the product that will easily hold up to 10kgs of weight. Just let us know in the comments :)
If you would like the two products in different lengths, each individual product can be seen in our other listings under the STEIVE and the SOLOMON.
### ALL HANGING INSTRUCTIONS ARE PROVIDED INCLUDING PLASTERBOARD, TIMBER OR BRICK / CONCRETE SCREWS AND PLUGS. ####
LENGHTS:
150cm | 140cm | 130cm | 120cm | 110cm 100cm | 90cm |80cm | 70cm | 60cm | 50cm | 40cm | 30cm
OVERALL SIZES:
16.5cm High x 6.5cm Deep
TIMBER OPTIONS:
Oak | Raw Oak | Walnut Stained Oak | Pine | Raw Pine | White Pine
NOTE:
Please be aware that the wood may vary in grain, tone and may show natural timber features such as gum veins. All materials are finished to the highest standard. Does not include accessories in images.
* IMPORTANT - PLEASE NOTE:
Weight capacity of up to 20kg depending on wall type, the wall fixings used, bracket (s) correctly installed, and actual shelf weight. Brick walls and solid timber stud attachments will carry the required weight. If you hang the shelf on plasterboard (hollow walls) using just the plasterboard fixings we provide, at least one screw should fasten into a stud. Weight capacity will be less up to 15kgs. If no studs are available, there will be a maximum of 10kgs load, including the shelf, if using just plasterboard fixings.
D E L I V E R Y:
Our products are made to order.
* Longer production times may occur in peak buying periods.
ALL ORDERS WILL REQUIRE SIGNATURE UPON DELIVERY UNLESS OTHERWISE STATED.
This product is 100% Australian hand made by Adam and Anita from Welds & Wood.
Our wooden bookshelf with peg board organiser in one listing. Two products purchased as one package. The SOL kids organiser is a perfect piece to store and display your favourite kids books and toys, as well as hand up jackets and bags.
Made from solid Australian Pine or Tasmanian Oak, each piece is finished to the highest standard. We round over the edges to give a smooth feel, and apply a kid safe, water and heat resistant, durable oil in satin-matte finish (not too glossy and not too matte).
To hang the SOL KIDS ORGANISERS we have drilled two keyhole mounting points into the back of the products. These create an attractive floating piece that is also safe and secure to hang up to 20kgs of weight*
If you would prefer to simply stick the shelf to your wall, we can apply a 3M adhesive strip to the product that will easily hold up to 10kgs of weight. Just let us know in the comments :)
If you would like the two products in different lengths, each individual product can be seen in our other listings under the STEIVE and the SOLOMON.
### ALL HANGING INSTRUCTIONS ARE PROVIDED INCLUDING PLASTERBOARD, TIMBER OR BRICK / CONCRETE SCREWS AND PLUGS. ####
LENGHTS:
150cm | 140cm | 130cm | 120cm | 110cm 100cm | 90cm |80cm | 70cm | 60cm | 50cm | 40cm | 30cm
OVERALL SIZES:
16.5cm High x 6.5cm Deep
TIMBER OPTIONS:
Oak | Raw Oak | Walnut Stained Oak | Pine | Raw Pine | White Pine
NOTE:
Please be aware that the wood may vary in grain, tone and may show natural timber features such as gum veins. All materials are finished to the highest standard. Does not include accessories in images.
* IMPORTANT - PLEASE NOTE:
Weight capacity of up to 20kg depending on wall type, the wall fixings used, bracket (s) correctly installed, and actual shelf weight. Brick walls and solid timber stud attachments will carry the required weight. If you hang the shelf on plasterboard (hollow walls) using just the plasterboard fixings we provide, at least one screw should fasten into a stud. Weight capacity will be less up to 15kgs. If no studs are available, there will be a maximum of 10kgs load, including the shelf, if using just plasterboard fixings.
D E L I V E R Y:
Our products are made to order.
* Longer production times may occur in peak buying periods.
ALL ORDERS WILL REQUIRE SIGNATURE UPON DELIVERY UNLESS OTHERWISE STATED.
This product is 100% Australian hand made by Adam and Anita from Welds & Wood.
SOL KIDS ORGANISER COMBO
Our wooden bookshelf with peg board organiser in one listing. Two products purchased as one package. The SOL kids organiser is a perfect piece to store and display your favourite kids books and toys, as well as hand up jackets and bags.
Made from solid Australian Pine or Tasmanian Oak, each piece is finished to the highest standard. We round over the edges to give a smooth feel, and apply a kid safe, water and heat resistant, durable oil in satin-matte finish (not too glossy and not too matte).
To hang the SOL KIDS ORGANISERS we have drilled two keyhole mounting points into the back of the products. These create an attractive floating piece that is also safe and secure to hang up to 20kgs of weight*
If you would prefer to simply stick the shelf to your wall, we can apply a 3M adhesive strip to the product that will easily hold up to 10kgs of weight. Just let us know in the comments :)
If you would like the two products in different lengths, each individual product can be seen in our other listings under the STEIVE and the SOLOMON.
### ALL HANGING INSTRUCTIONS ARE PROVIDED INCLUDING PLASTERBOARD, TIMBER OR BRICK / CONCRETE SCREWS AND PLUGS. ####
LENGHTS:
150cm | 140cm | 130cm | 120cm | 110cm 100cm | 90cm |80cm | 70cm | 60cm | 50cm | 40cm | 30cm
OVERALL SIZES:
16.5cm High x 6.5cm Deep
TIMBER OPTIONS:
Oak | Raw Oak | Walnut Stained Oak | Pine | Raw Pine | White Pine
NOTE:
Please be aware that the wood may vary in grain, tone and may show natural timber features such as gum veins. All materials are finished to the highest standard. Does not include accessories in images.
* IMPORTANT - PLEASE NOTE:
Weight capacity of up to 20kg depending on wall type, the wall fixings used, bracket (s) correctly installed, and actual shelf weight. Brick walls and solid timber stud attachments will carry the required weight. If you hang the shelf on plasterboard (hollow walls) using just the plasterboard fixings we provide, at least one screw should fasten into a stud. Weight capacity will be less up to 15kgs. If no studs are available, there will be a maximum of 10kgs load, including the shelf, if using just plasterboard fixings.
D E L I V E R Y:
Our products are made to order.
* Longer production times may occur in peak buying periods.
ALL ORDERS WILL REQUIRE SIGNATURE UPON DELIVERY UNLESS OTHERWISE STATED.
This product is 100% Australian hand made by Adam and Anita from Welds & Wood.
Our wooden bookshelf with peg board organiser in one listing. Two products purchased as one package. The SOL kids organiser is a perfect piece to store and display your favourite kids books and toys, as well as hand up jackets and bags.
Made from solid Australian Pine or Tasmanian Oak, each piece is finished to the highest standard. We round over the edges to give a smooth feel, and apply a kid safe, water and heat resistant, durable oil in satin-matte finish (not too glossy and not too matte).
To hang the SOL KIDS ORGANISERS we have drilled two keyhole mounting points into the back of the products. These create an attractive floating piece that is also safe and secure to hang up to 20kgs of weight*
If you would prefer to simply stick the shelf to your wall, we can apply a 3M adhesive strip to the product that will easily hold up to 10kgs of weight. Just let us know in the comments :)
If you would like the two products in different lengths, each individual product can be seen in our other listings under the STEIVE and the SOLOMON.
### ALL HANGING INSTRUCTIONS ARE PROVIDED INCLUDING PLASTERBOARD, TIMBER OR BRICK / CONCRETE SCREWS AND PLUGS. ####
LENGHTS:
150cm | 140cm | 130cm | 120cm | 110cm 100cm | 90cm |80cm | 70cm | 60cm | 50cm | 40cm | 30cm
OVERALL SIZES:
16.5cm High x 6.5cm Deep
TIMBER OPTIONS:
Oak | Raw Oak | Walnut Stained Oak | Pine | Raw Pine | White Pine
NOTE:
Please be aware that the wood may vary in grain, tone and may show natural timber features such as gum veins. All materials are finished to the highest standard. Does not include accessories in images.
* IMPORTANT - PLEASE NOTE:
Weight capacity of up to 20kg depending on wall type, the wall fixings used, bracket (s) correctly installed, and actual shelf weight. Brick walls and solid timber stud attachments will carry the required weight. If you hang the shelf on plasterboard (hollow walls) using just the plasterboard fixings we provide, at least one screw should fasten into a stud. Weight capacity will be less up to 15kgs. If no studs are available, there will be a maximum of 10kgs load, including the shelf, if using just plasterboard fixings.
D E L I V E R Y:
Our products are made to order.
* Longer production times may occur in peak buying periods.
ALL ORDERS WILL REQUIRE SIGNATURE UPON DELIVERY UNLESS OTHERWISE STATED.
This product is 100% Australian hand made by Adam and Anita from Welds & Wood.